Why Anaesthesiology Departments Choose Peripheral Nerve Block Needles

Quick answer: Peripheral nerve block needles are listed for peripheral nerve and plexus blockade in anaesthesiology departments. The published configuration is 21G / 22G x 50 / 80 / 100 / 150 mm. For operating room nursing managers, the practical decision is whether that configuration matches the existing orthopaedic operating rooms routine and the documentation held in the registration file.

Why Anaesthesiology Departments Choose Peripheral Nerve Block Needles

What Peripheral Nerve Block Needles Are and How the Range Is Organised

The GaoGuan Medical product sheet groups peripheral nerve block needles within Anesthesia / Spinal Needles and gives the configuration as 21G / 22G x 50 / 80 / 100 / 150 mm. Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Because the stated use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, the configuration is discussed in relation to that procedure. Typical deployment is described around anaesthesiology departments, with orthopaedic operating rooms named as a target setting.

Peripheral nerve block needles are intended for peripheral nerve and plexus blockade; beyond that stated use, no additional indication is claimed. Record decisions in writing so that the next procurement cycle starts from a stable baseline. For anaesthesiology departments, the relevant channel is Pain clinic supply, with operating room nursing managers drafting the requirement. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm.

Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. The same discipline applies across the range, from peripheral nerve block needles to spinal anaesthesia kits. Safety discussions should stay with design intent and handling, and avoid unsupported performance claims. Peripheral nerve block needles are listed in the GaoGuan Medical range under Anesthesia / Spinal Needles, with a stated specification of 21G / 22G x 50 / 80 / 100 / 150 mm.

What Peripheral Nerve Block Needles Are Actually for

The stated purpose is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, which is the reason the line is included in anaesthesiology departments purchasing. For orthopaedic operating rooms, the relevant use case remains peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance rather than a broader therapeutic claim. The GaoGuan Medical listing treats peripheral nerve block needles as a consumable line with a fixed specification of 21G / 22G x 50 / 80 / 100 / 150 mm. Standardising needle placement and confirmation is often easier than renegotiating the specification later.

  • Stated use: Peripheral nerve and plexus block; insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.
  • Insulation choice follows the guidance method, not the gauge.
  • Longer lengths serve deep plexus approaches.
  • Ultrasound-led services generally specify non-insulated needles.

In anaesthesiology departments, the relevant departments are orthopaedic operating rooms, and purchasing usually follows their protocol. The use case recorded in the product data is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and specifications are written around it. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. Where the source data notes ultrasound-led services generally specify non-insulated needles, that statement should be quoted as written rather than expanded.

Acceptance criteria should be written before the first delivery so that operating room nursing managers and the supplier read them the same way. Record decisions in writing so that the next procurement cycle starts from a stable baseline. The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern. Because the stated use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, the configuration is discussed in relation to that procedure.

Which Departments Specify Peripheral Nerve Block Needles

Peripheral nerve block needles appear in the application list for anaesthesiology departments, specifically around orthopaedic operating rooms. Typical deployment is described around anaesthesiology departments, with orthopaedic operating rooms named as a target setting. The route to market recorded for this line runs through Pain clinic supply. Teams in orthopaedic operating rooms usually map peripheral nerve block needles against needle placement and confirmation before fixing a standing order.

  • Application settings named in the source data:
  • Hospital anaesthesiology departments performing regional blocks
  • Pain medicine departments
  • Departments and specialist hospitals using ultrasound-guided blocks
  • Regional distributors

The source listing gives the main use as peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, without extending the claim to other indications. Demand for peripheral nerve block needles is concentrated in orthopaedic operating rooms, where the stated use is performed routinely. The same discipline applies across the range, from peripheral nerve block needles to spinal anaesthesia kits. Distribution is described through Pain clinic supply, which is where operating room nursing managers usually place volume orders.

The published specification is 21G / 22G x 50 / 80 / 100 / 150 mm, and any equivalent offer should be compared against it line by line. Teams in orthopaedic operating rooms usually map peripheral nerve block needles against needle placement and confirmation before fixing a standing order. Training and correct handling are the practical levers available to orthopaedic operating rooms when introducing a new consumable. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording.

Practical Handling of Peripheral Nerve Block Needles in Anaesthesiology Departments

Pre-operative case picking is the point at which pack presentation and component order matter most. Standardising needle placement and confirmation is often easier than renegotiating the specification later. The source data places peripheral nerve block needles in orthopaedic operating rooms as well as in wider distribution channels. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot.

  • Workflow steps relevant to anaesthesiology departments:
  • pre-operative case picking
  • sterile field set-up
  • needle placement and confirmation
  • post-case disposal and documentation

In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed. Where a service changes needle placement and confirmation, the pack configuration should be reviewed at the same time. Training is also the right moment to explain why substitutions are not made without approval. This is a descriptive comparison of catalogue configurations, not a clinical performance claim.

Where anaesthesiology departments runs several departments, separate stock points should still share one configuration list. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Anaesthesia department heads should record deviations and handling observations through the department’s usual reporting route. In day-to-day work the sequence runs through needle placement and confirmation, so the consumable has to fit that step without rework.

Safety and Handling Considerations for Peripheral Nerve Block Needles

Safety discussions should stay with design intent and handling, and avoid unsupported performance claims. Single-patient use and aseptic handling are the two safety topics most often written into anaesthesiology departments specifications. For orthopaedic operating rooms, the relevant use case remains peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance rather than a broader therapeutic claim. Supervisors should record which configuration each team was trained on and when.

A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Keep the discussion anchored to what the specification actually says and to how orthopaedic operating rooms work. Standardising needle placement and confirmation is often easier than renegotiating the specification later.

Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. For anaesthesiology departments, the practical question is whether the configuration fits the existing routine without extra handling. Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue. The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern.

Reading the Peripheral Nerve Block Needles Specification

Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. In catalogue terms, peripheral nerve block needles sit in the Anesthesia / Spinal Needles line rather than in a separate device family. Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.

ParameterStated specificationNotes / configuration
21G50 / 80 / 100 / 150 mmInsulated or non-insulated
22G50 / 80 / 100 / 150 mmInsulated or non-insulated

Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. The registration file should name the same configuration, 21G / 22G x 50 / 80 / 100 / 150 mm, that appears on the purchase order.

Ordering a single size for a department that works across a size matrix leads to mid-case substitution. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Inventory planning for peripheral nerve block needles normally follows a size matrix, so slow-moving variants should be identified early. The specification 21G / 22G x 50 / 80 / 100 / 150 mm is descriptive, not a performance claim, and should be read that way.

Introducing Peripheral Nerve Block Needles to Ambulatory Surgery Centres

Competency checks should cover aseptic opening, correct identification of 21G / 22G x 50 / 80 / 100 / 150 mm and the disposal route. Supervisors should record which configuration each team was trained on and when. Standardising needle placement and confirmation is often easier than renegotiating the specification later. Where the source data notes ultrasound-led services generally specify non-insulated needles, that statement should be quoted as written rather than expanded.

  • Handling topics for a short competency session:
  • pre-operative case picking
  • sterile field set-up
  • needle placement and confirmation
  • post-case disposal and documentation
  • Recognition of the configuration 21G / 22G x 50 / 80 / 100 / 150 mm.

Acceptance criteria should be written before the first delivery so that operating room nursing managers and the supplier read them the same way. Review these points with operating room nursing managers before the specification is issued, not after quotations arrive. Peripheral nerve block needles are intended for peripheral nerve and plexus blockade; beyond that stated use, no additional indication is claimed. Leaving the pack format undefined invites quotations that cannot be compared.

Shelf-life and rotation are managed through lot records; first-expiry-first-out is the usual rule. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Training is also the right moment to explain why substitutions are not made without approval. Requests for samples should use the exact configuration intended for the contract.

Points Often Raised About Peripheral Nerve Block Needles

Keep the discussion anchored to what the specification actually says and to how orthopaedic operating rooms work. Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance. Configuration details such as 21G / 22G x 50 / 80 / 100 / 150 mm belong in the technical schedule, not in a separate email. Distribution is described through Pain clinic supply, which is where operating room nursing managers usually place volume orders.

At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Reorder points should account for lead time and for any documentation checks on arrival.

Single-patient use and aseptic handling are the two safety topics most often written into anaesthesiology departments specifications. Review these points with operating room nursing managers before the specification is issued, not after quotations arrive. Anaesthesia department heads usually award on a combination of specification fit, supply continuity and document completeness. Standardising needle placement and confirmation is often easier than renegotiating the specification later.

Frequently asked questions

What is the stated use of peripheral nerve block needles?

Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance. Configuration details such as 21G / 22G x 50 / 80 / 100 / 150 mm belong in the technical schedule, not in a separate email. Review these points with operating room nursing managers before the specification is issued, not after quotations arrive.

What documentation is normally requested for peripheral nerve block needles?

Typical deployment is described around anaesthesiology departments, with orthopaedic operating rooms named as a target setting. The route to market recorded for this line runs through Pain clinic supply. A sample retention and lot-traceability routine makes later investigations considerably shorter.

What belongs in an acceptance check for peripheral nerve block needles?

A change to 21G / 22G x 50 / 80 / 100 / 150 mm or to the pack contents normally triggers a regulatory review on the buyer’s side. Requests for samples should use the exact configuration intended for the contract. A short, precise specification is cheaper to administer than a long one full of unverifiable claims.

Are peripheral nerve block needles and spinal anaesthesia kits interchangeable?

Where the source data notes ultrasound-led services generally specify non-insulated needles, that statement should be quoted as written rather than expanded. A workflow built around needle placement and confirmation leaves little room for opening multiple separately packed items. Introduce peripheral nerve block needles with a short handling session focused on needle placement and confirmation rather than on catalogue detail.

Continue reading


Need a specification, pack configuration or documentation list for peripheral nerve block needles in anaesthesiology departments? Contact the GaoGuan Medical team to request the current product data sheet and a sample configuration.

Share this :

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Quote
Download technical documentation
Please fill out the form below to receive product brochures, specifications, and technical details.