Peripheral Nerve Block Needles Supply Planning for Regional Block Services

Quick answer: Peripheral nerve block needles are a Anesthesia / Spinal Needles item intended for peripheral nerve and plexus blockade, supplied as 21G / 22G x 50 / 80 / 100 / 150 mm. In regional block services the relevant buyers are regional anaesthesia coordinators, and the common purchasing question is ultrasound versus stimulator guidance.

Peripheral Nerve Block Needles Supply Planning for Regional Block Services

What Drives Peripheral Nerve Block Needles Spend

Freight, storage conditions and lot rotation are usually handled as separate lines in regional block services budgets. Where a kit replaces individually picked components, compare the full set-up cost rather than a single item. Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause. Storage conditions should follow the labelled requirements and the supplier’s written handling instructions.

Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Non-conforming lots should be quarantined and recorded against the same specification used for ordering. The route to market recorded for this line runs through Pain clinic supply.

Leaving the pack format undefined invites quotations that cannot be compared. For regional block services, the practical question is whether the configuration fits the existing routine without extra handling. Cost comparisons are meaningful only when every quotation uses the same configuration 21G / 22G x 50 / 80 / 100 / 150 mm. Teams in interventional pain centres usually map peripheral nerve block needles against procedure-specific kit configuration before fixing a standing order.

Replenishment Planning for Peripheral Nerve Block Needles

Inventory planning for peripheral nerve block needles normally follows a size matrix, so slow-moving variants should be identified early. A par level set by interventional pain centres reduces the risk of substituting a different gauge mid-case. Gauge, length and configuration appear in the listing as 21G / 22G x 50 / 80 / 100 / 150 mm, so substitutions should be flagged explicitly. Standardising procedure-specific kit configuration is often easier than renegotiating the specification later.

Consistent presentation across lots matters as much as the contents of any single pack. Regional anaesthesia coordinators usually award on a combination of specification fit, supply continuity and document completeness. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Staff in interventional pain centres benefit from a one-page configuration card kept at the point of use.

Pack format, documentation work and change-control effort all sit inside the total cost, not just the unit price. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Where regional block services runs several departments, separate stock points should still share one configuration list. Tender documents for peripheral nerve block needles are usually prepared by regional anaesthesia coordinators and fulfilled through Pain clinic supply.

Specifications and Configurations for Peripheral Nerve Block Needles

Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. When regional anaesthesia coordinators compare offers, 21G / 22G x 50 / 80 / 100 / 150 mm is the field that most often gets shortened or lost. Buyers will find peripheral nerve block needles under Anesthesia / Spinal Needles, where the range is described as 21G / 22G x 50 / 80 / 100 / 150 mm. The stated purpose is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, which is the reason the line is included in regional block services purchasing.

ParameterStated specificationNotes / configuration
21G50 / 80 / 100 / 150 mmInsulated or non-insulated
22G50 / 80 / 100 / 150 mmInsulated or non-insulated

Requests for samples should use the exact configuration intended for the contract. Review these points with regional anaesthesia coordinators before the specification is issued, not after quotations arrive. A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers.

The most common specification error is quoting the product family without the configuration 21G / 22G x 50 / 80 / 100 / 150 mm. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. A par level set by interventional pain centres reduces the risk of substituting a different gauge mid-case. Gauge, length and configuration appear in the listing as 21G / 22G x 50 / 80 / 100 / 150 mm, so substitutions should be flagged explicitly.

Writing a Peripheral Nerve Block Needles Specification

Regional anaesthesia coordinators usually award on a combination of specification fit, supply continuity and document completeness. Volume planning should be expressed per department and per month, not as a single annual lump figure. Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot.

  • Tender specification checkpoints:
  • State the configuration exactly as 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Define the application setting: regional block services.
  • List the documentation set required at delivery.
  • State how deviations and substitutions will be handled.

Peripheral nerve block needles reach regional block services through Pain clinic supply, rather than only through direct hospital purchasing. Whether CE marking under MDR, FDA 510(k) clearance or another route applies depends on the destination market and must be confirmed against the supplier’s current file. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Storage conditions should follow the labelled requirements and the supplier’s written handling instructions.

Skipping a written confirmation step on configuration changes undermines version control over time. Review these points with regional anaesthesia coordinators before the specification is issued, not after quotations arrive. Requests for samples should use the exact configuration intended for the contract. Cost comparisons are meaningful only when every quotation uses the same configuration 21G / 22G x 50 / 80 / 100 / 150 mm.

Distribution Routes for Peripheral Nerve Block Needles

The route to market recorded for this line runs through Pain clinic supply. The buyers named in the data include regional anaesthesia coordinators, who typically work from a written specification. In regional block services, the relevant departments are interventional pain centres, and purchasing usually follows their protocol. Regional anaesthesia coordinators usually award on a combination of specification fit, supply continuity and document completeness.

  • Channels listed for this line:
  • Regional anaesthesia programmes
  • Pain clinic supply
  • Ultrasound-guided block training
  • Import registration and hospital group agreement supply, where applicable.

OEM supply can be structured as loose components for kit assembly or as finished sterile packs. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Shelf-life and rotation are managed through lot records; first-expiry-first-out is the usual rule.

Ask for the cost of samples, document packs and any configuration approval step to be stated separately. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Peripheral nerve block needles reach regional block services through Pain clinic supply, rather than only through direct hospital purchasing. Regional anaesthesia coordinators usually require that any configuration change be confirmed in writing before the next shipment.

Quality Checks for Peripheral Nerve Block Needles in Regional Block Services

Regional anaesthesia coordinators usually require that any configuration change be confirmed in writing before the next shipment. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. When regional anaesthesia coordinators compare offers, 21G / 22G x 50 / 80 / 100 / 150 mm is the field that most often gets shortened or lost. No certification status should be assumed from a catalogue; ask for the current, valid document instead.

  • Goods-in checks for peripheral nerve block needles:
  • Label wording matches the purchase order.
  • Configuration reads 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Pack integrity is intact and lot identification is legible.
  • Documentation set matches the agreed dossier.
  • Deviations are quarantined and recorded.

Version-locked configurations make stock reconciliation simpler because the item identity does not move. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs. The most common specification error is quoting the product family without the configuration 21G / 22G x 50 / 80 / 100 / 150 mm. Long-term agreements work better when the configuration is version-locked and changes require written confirmation.

Regional anaesthesia coordinators should record deviations and handling observations through the department’s usual reporting route. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. A sample retention and lot-traceability routine makes later investigations considerably shorter. Distribution is described through Pain clinic supply, which is where regional anaesthesia coordinators usually place volume orders.

Primary Uses of Peripheral Nerve Block Needles

For interventional pain centres, the relevant use case remains peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance rather than a broader therapeutic claim. The use case recorded in the product data is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and specifications are written around it. The GaoGuan Medical product sheet groups peripheral nerve block needles within Anesthesia / Spinal Needles and gives the configuration as 21G / 22G x 50 / 80 / 100 / 150 mm. Where a service changes procedure-specific kit configuration, the pack configuration should be reviewed at the same time.

  • Stated use: Peripheral nerve and plexus block; insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.
  • Insulation choice follows the guidance method, not the gauge.
  • Longer lengths serve deep plexus approaches.
  • Ultrasound-led services generally specify non-insulated needles.

Application planning for peripheral nerve block needles starts with the setting: interventional pain centres and similar units. In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Purchasing teams should ask how the chosen configuration supports the department’s existing safety protocol.

Pack integrity is the first visual check; configuration against the purchase order is the second. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs. Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause. The source listing gives the main use as peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, without extending the claim to other indications.

Pre-Order Checklist for Peripheral Nerve Block Needles

Requests for samples should use the exact configuration intended for the contract. The published specification is 21G / 22G x 50 / 80 / 100 / 150 mm, and any equivalent offer should be compared against it line by line. A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers.

  • Pre-order checklist for regional block services:
  • ultrasound versus stimulator guidance
  • deep plexus reach
  • per-procedure accessory sets
  • department-level version control
  • Configuration stated as 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Documentation set and acceptance criteria agreed in writing.

Counting by configuration rather than by carton prevents silent drift in what is actually on the shelf. Keep the discussion anchored to what the specification actually says and to how interventional pain centres work. Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. Supervisors should record which configuration each team was trained on and when.

The buyers named in the data include regional anaesthesia coordinators, who typically work from a written specification. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Pack format, documentation work and change-control effort all sit inside the total cost, not just the unit price. Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue.

Frequently asked questions

Can peripheral nerve block needles be supplied for kit assembly or private label?

In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed. Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Where the data is silent, the sensible approach is a qualitative requirement plus a document request.

Why does the registration file need to match 21G / 22G x 50 / 80 / 100 / 150 mm?

Application planning for peripheral nerve block needles starts with the setting: interventional pain centres and similar units. Peripheral nerve block needles reach regional block services through Pain clinic supply, rather than only through direct hospital purchasing. Regional anaesthesia coordinators usually require that any configuration change be confirmed in writing before the next shipment.

How should regional anaesthesia coordinators handle a proposed configuration change?

Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Regional anaesthesia coordinators usually award on a combination of specification fit, supply continuity and document completeness. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes.

How should a size matrix for peripheral nerve block needles be planned?

Single-patient use and aseptic handling are the two safety topics most often written into regional block services specifications. The stated use, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, has to be achievable inside the existing procedure-specific kit configuration routine. Supervisors should record which configuration each team was trained on and when.

Continue reading


Request the current Peripheral Nerve Block Needle catalogue entry, configuration options and documentation checklist from the GaoGuan Medical export team.

Share this :

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Quote
Download technical documentation
Please fill out the form below to receive product brochures, specifications, and technical details.