Pencil-Point Spinal Needles for Kit Assembly Plants: Applications, Uses and Buying Notes

Quick answer: For kit assembly plants, pencil-point spinal needles are the consumable line associated with subarachnoid block. The configuration in the product data is 25G / 26G / 27G x 90 / 103 / 120 mm; the sections below cover where the item is used, what it is for and how the specification should be written.

Pencil-Point Spinal Needles for Kit Assembly Plants: Applications, Uses and Buying Notes

Where Pencil-Point Spinal Needles Sit in the Product Range

The GaoGuan Medical product sheet groups pencil-point spinal needles within Anesthesia / Spinal Needles and gives the configuration as 25G / 26G / 27G x 90 / 103 / 120 mm. Repeat the same wording, 25G / 26G / 27G x 90 / 103 / 120 mm, across the purchase order, the pack label and the registration file. Because the stated use is subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, the configuration is discussed in relation to that procedure. Typical deployment is described around kit assembly plants, with anaesthesia puncture-pack manufacturing named as a target setting.

Pencil-point spinal needles are intended for subarachnoid block; beyond that stated use, no additional indication is claimed. Review these points with private label programme managers before the specification is issued, not after quotations arrive. For kit assembly plants, the relevant channel is Regional consumable distributors, with private label programme managers drafting the requirement. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 25G / 26G / 27G x 90 / 103 / 120 mm.

Because the stated configuration is 25G / 26G / 27G x 90 / 103 / 120 mm, a tender that omits it invites inconsistent quotations. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Safety discussions should stay with design intent and handling, and avoid unsupported performance claims. Pencil-point spinal needles are listed in the GaoGuan Medical range under Anesthesia / Spinal Needles, with a stated specification of 25G / 26G / 27G x 90 / 103 / 120 mm.

Where Pencil-Point Spinal Needles Are Used in Kit Assembly Plants

The application settings recorded for this line include anaesthesia puncture-pack manufacturing and comparable services. In kit assembly plants, the relevant departments are anaesthesia puncture-pack manufacturing, and purchasing usually follows their protocol. Filler and mesotherapy brand owners tend to evaluate pencil-point spinal needles against a fixed configuration before discussing volume. Standardising written change confirmation is often easier than renegotiating the specification later.

  • Application settings named in the source data:
  • Anesthesiology departments and operating rooms of general hospitals
  • Maternity and obstetric hospitals for labour and caesarean anaesthesia
  • Anaesthesia puncture-pack manufacturers sourcing loose needles
  • Medical consumable distributors

For anaesthesia puncture-pack manufacturing, the relevant use case remains subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients rather than a broader therapeutic claim. Application planning for pencil-point spinal needles starts with the setting: anaesthesia puncture-pack manufacturing and similar units. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Purchasing responsibility generally sits with private label programme managers, supported by Regional consumable distributors.

Gauge, length and configuration appear in the listing as 25G / 26G / 27G x 90 / 103 / 120 mm, so substitutions should be flagged explicitly. Standardising written change confirmation is often easier than renegotiating the specification later. Where the source data notes pencil-point tip separates rather than cuts dural fibres, that statement should be quoted as written rather than expanded. Record decisions in writing so that the next procurement cycle starts from a stable baseline.

What Pencil-Point Spinal Needles Are Actually for

Because the stated use is subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, the configuration is discussed in relation to that procedure. The source listing gives the main use as subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, without extending the claim to other indications. Buyers will find pencil-point spinal needles under Anesthesia / Spinal Needles, where the range is described as 25G / 26G / 27G x 90 / 103 / 120 mm. Teams in anaesthesia puncture-pack manufacturing usually map pencil-point spinal needles against written change confirmation before fixing a standing order.

  • Stated use: Subarachnoid (spinal) block with a lower risk of post-dural-puncture headache; suited to obstetric and younger patients.
  • Pencil-point tip separates rather than cuts dural fibres.
  • Commonly shortlisted where headache risk drives needle policy.
  • Supplied loose for OEM kit assembly or as part of a sterile pack.

Typical deployment is described around kit assembly plants, with anaesthesia puncture-pack manufacturing named as a target setting. Specifying teams should anchor the requirement to the stated purpose, subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Training and correct handling are the practical levers available to anaesthesia puncture-pack manufacturing when introducing a new consumable.

At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 25G / 26G / 27G x 90 / 103 / 120 mm. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Evaluation criteria should be visible to all bidders so that equivalent offers can be compared fairly. The use case recorded in the product data is subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, and specifications are written around it.

From Set-Up to Disposal: Pencil-Point Spinal Needles in Kit Assembly Plants

Component specification is the point at which pack presentation and component order matter most. Standardising written change confirmation is often easier than renegotiating the specification later. The source data places pencil-point spinal needles in anaesthesia puncture-pack manufacturing as well as in wider distribution channels. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot.

  • Workflow steps relevant to kit assembly plants:
  • component specification
  • loose needle or kit-level supply
  • configuration version locking
  • written change confirmation

In practical terms the primary use is subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, and that purpose drives where the product is deployed. Where a service changes written change confirmation, the pack configuration should be reviewed at the same time. Training is also the right moment to explain why substitutions are not made without approval. For kit assembly plants, the practical question is whether the configuration fits the existing routine without extra handling.

Where kit assembly plants runs several departments, separate stock points should still share one configuration list. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. Filler and mesotherapy brand owners should record deviations and handling observations through the department’s usual reporting route. In day-to-day work the sequence runs through written change confirmation, so the consumable has to fit that step without rework.

Technical Schedule for Pencil-Point Spinal Needles

The published specification is 25G / 26G / 27G x 90 / 103 / 120 mm, and any equivalent offer should be compared against it line by line. Configuration details such as 25G / 26G / 27G x 90 / 103 / 120 mm belong in the technical schedule, not in a separate email. The Pencil-Point Spinal Needle (Whitacre type) entry describes subarachnoid block and records 25G / 26G / 27G x 90 / 103 / 120 mm as the available specification. The use case recorded in the product data is subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, and specifications are written around it.

ParameterStated specificationNotes / configuration
25G90 / 103 / 120 mmPencil-point (Whitacre)
26G90 / 103 / 120 mmPencil-point (Whitacre)
27G90 / 103 / 120 mmPencil-point (Whitacre)

Long-term agreements work better when the configuration is version-locked and changes require written confirmation. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Acceptance criteria should be written before the first delivery so that private label programme managers and the supplier read them the same way. Importers typically verify that the supplied item matches the product description held in the local registration dossier.

Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. The same discipline applies across the range, from pencil-point spinal needles to customised procedure packs. Shelf-life and rotation are managed through lot records; first-expiry-first-out is the usual rule. Repeat the same wording, 25G / 26G / 27G x 90 / 103 / 120 mm, across the purchase order, the pack label and the registration file.

Single-Use Pencil-Point Spinal Needles in Kit Assembly Plants

Where the source data notes pencil-point tip separates rather than cuts dural fibres, that statement should be quoted as written rather than expanded. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. The source listing gives the main use as subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients, without extending the claim to other indications. In day-to-day work the sequence runs through written change confirmation, so the consumable has to fit that step without rework.

  • Single-use and aseptic points for kit assembly plants:
  • Confirm the disposable presentation on the label.
  • Check pack integrity before opening.
  • Record the lot against the department’s documentation routine.
  • Dispose of the item according to the local clinical waste protocol.

A change to 25G / 26G / 27G x 90 / 103 / 120 mm or to the pack contents normally triggers a regulatory review on the buyer’s side. Keep the discussion anchored to what the specification actually says and to how anaesthesia puncture-pack manufacturing work. When a new gauge or length is added, refresh the training note rather than relying on the old version. Inventory planning for pencil-point spinal needles normally follows a size matrix, so slow-moving variants should be identified early.

Requests for samples should use the exact configuration intended for the contract. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Single-patient use and aseptic handling are the two safety topics most often written into kit assembly plants specifications. In kit assembly plants, the relevant departments are anaesthesia puncture-pack manufacturing, and purchasing usually follows their protocol.

How Kit Assembly Plants Source Pencil-Point Spinal Needles

Distribution is described through Regional consumable distributors, which is where private label programme managers usually place volume orders. Filler and mesotherapy brand owners tend to evaluate pencil-point spinal needles against a fixed configuration before discussing volume. Pencil-point spinal needles are listed for use in anaesthesia puncture-pack manufacturing, which shapes both the specification and the pack configuration. The application setting, kit assembly plants, belongs in the specification because it determines pack format and replenishment pattern.

  • Channels listed for this line:
  • Hospital tender and group purchasing
  • Anaesthesia kit OEM assembly
  • Regional consumable distributors
  • Import registration and hospital group agreement supply, where applicable.

Component traceability matters more in OEM supply because the finished pack carries another party’s label. Importers typically verify that the supplied item matches the product description held in the local registration dossier. The same discipline applies across the range, from pencil-point spinal needles to customised procedure packs. Version-locked configurations make stock reconciliation simpler because the item identity does not move.

Freight, storage conditions and lot rotation are usually handled as separate lines in kit assembly plants budgets. Keep the discussion anchored to what the specification actually says and to how anaesthesia puncture-pack manufacturing work. Tender documents for pencil-point spinal needles are usually prepared by private label programme managers and fulfilled through Regional consumable distributors. Non-conforming lots should be quarantined and recorded against the same specification used for ordering.

Verifying Pencil-Point Spinal Needles on Delivery

Non-conforming lots should be quarantined and recorded against the same specification used for ordering. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 25G / 26G / 27G x 90 / 103 / 120 mm. Configuration details such as 25G / 26G / 27G x 90 / 103 / 120 mm belong in the technical schedule, not in a separate email. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers.

  • Goods-in checks for pencil-point spinal needles:
  • Label wording matches the purchase order.
  • Configuration reads 25G / 26G / 27G x 90 / 103 / 120 mm.
  • Pack integrity is intact and lot identification is legible.
  • Documentation set matches the agreed dossier.
  • Deviations are quarantined and recorded.

Counting by configuration rather than by carton prevents silent drift in what is actually on the shelf. For kit assembly plants, the practical question is whether the configuration fits the existing routine without extra handling. Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. Filler and mesotherapy brand owners usually award on a combination of specification fit, supply continuity and document completeness.

Single-patient use and aseptic handling are the two safety topics most often written into kit assembly plants specifications. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Acceptance criteria should be written before the first delivery so that private label programme managers and the supplier read them the same way. Pencil-point spinal needles reach kit assembly plants through Regional consumable distributors, rather than only through direct hospital purchasing.

Frequently asked questions

How should a size matrix for pencil-point spinal needles be planned?

For anaesthesia puncture-pack manufacturing, the relevant use case remains subarachnoid (spinal) block with a lower risk of post-dural-puncture headache, and is suited to obstetric and younger patients rather than a broader therapeutic claim. Gauge, length and configuration appear in the listing as 25G / 26G / 27G x 90 / 103 / 120 mm, so substitutions should be flagged explicitly. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes.

What specification should appear on a pencil-point spinal needles purchase order?

The application settings recorded for this line include anaesthesia puncture-pack manufacturing and comparable services. Distribution is described through Regional consumable distributors, which is where private label programme managers usually place volume orders. Acceptance criteria should be written before the first delivery so that private label programme managers and the supplier read them the same way.

How is sterility and pack integrity checked on delivery?

No certification status should be assumed from a catalogue; ask for the current, valid document instead. Long-term agreements work better when the configuration is version-locked and changes require written confirmation. Record decisions in writing so that the next procurement cycle starts from a stable baseline.

What is the stated use of pencil-point spinal needles?

Filler and mesotherapy brand owners should record deviations and handling observations through the department’s usual reporting route. In day-to-day work the sequence runs through written change confirmation, so the consumable has to fit that step without rework. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict.

Continue reading


Tell the GaoGuan Medical team about your kit assembly plants workflow and receive a proposed pencil-point spinal needles configuration for review by private label programme managers.

Share this :

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Quote
Download technical documentation
Please fill out the form below to receive product brochures, specifications, and technical details.