Quick answer: Peripheral nerve block needles are a Anesthesia / Spinal Needles item intended for peripheral nerve and plexus blockade, supplied as 21G / 22G x 50 / 80 / 100 / 150 mm. In regional block services the relevant buyers are regional anaesthesia coordinators, and the common purchasing question is ultrasound versus stimulator guidance.

Peripheral Nerve Block Needles: The Catalogue Definition
The GaoGuan Medical product sheet groups peripheral nerve block needles within Anesthesia / Spinal Needles and gives the configuration as 21G / 22G x 50 / 80 / 100 / 150 mm. Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Because the stated use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, the configuration is discussed in relation to that procedure. Typical deployment is described around regional block services, with pain medicine departments named as a target setting.
Peripheral nerve block needles are intended for peripheral nerve and plexus blockade; beyond that stated use, no additional indication is claimed. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. For regional block services, the relevant channel is Pain clinic supply, with regional anaesthesia coordinators drafting the requirement. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm.
Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. Keep the discussion anchored to what the specification actually says and to how pain medicine departments work. Safety discussions should stay with design intent and handling, and avoid unsupported performance claims. Peripheral nerve block needles are listed in the GaoGuan Medical range under Anesthesia / Spinal Needles, with a stated specification of 21G / 22G x 50 / 80 / 100 / 150 mm.
Uses That Drive Demand for Peripheral Nerve Block Needles
The stated purpose is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, which is the reason the line is included in regional block services purchasing. For pain medicine departments, the relevant use case remains peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance rather than a broader therapeutic claim. The GaoGuan Medical listing treats peripheral nerve block needles as a consumable line with a fixed specification of 21G / 22G x 50 / 80 / 100 / 150 mm. Standardising post-procedure audit is often easier than renegotiating the specification later.
- Stated use: Peripheral nerve and plexus block; insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.
- Insulation choice follows the guidance method, not the gauge.
- Longer lengths serve deep plexus approaches.
- Ultrasound-led services generally specify non-insulated needles.
In regional block services, the relevant departments are pain medicine departments, and purchasing usually follows their protocol. The use case recorded in the product data is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and specifications are written around it. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Where the source data notes insulation choice follows the guidance method, not the gauge, that statement should be quoted as written rather than expanded.
Acceptance criteria should be written before the first delivery so that regional anaesthesia coordinators and the supplier read them the same way. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. The application setting, regional block services, belongs in the specification because it determines pack format and replenishment pattern. Because the stated use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, the configuration is discussed in relation to that procedure.
Where Peripheral Nerve Block Needles Are Used in Regional Block Services
Peripheral nerve block needles appear in the application list for regional block services, specifically around pain medicine departments. Typical deployment is described around regional block services, with pain medicine departments named as a target setting. The route to market recorded for this line runs through Pain clinic supply. Teams in pain medicine departments usually map peripheral nerve block needles against post-procedure audit before fixing a standing order.
- Application settings named in the source data:
- Hospital anaesthesiology departments performing regional blocks
- Pain medicine departments
- Departments and specialist hospitals using ultrasound-guided blocks
- Regional distributors
The source listing gives the main use as peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, without extending the claim to other indications. Demand for peripheral nerve block needles is concentrated in pain medicine departments, where the stated use is performed routinely. Keep the discussion anchored to what the specification actually says and to how pain medicine departments work. Distribution is described through Pain clinic supply, which is where regional anaesthesia coordinators usually place volume orders.
The published specification is 21G / 22G x 50 / 80 / 100 / 150 mm, and any equivalent offer should be compared against it line by line. Teams in pain medicine departments usually map peripheral nerve block needles against post-procedure audit before fixing a standing order. Training and correct handling are the practical levers available to pain medicine departments when introducing a new consumable. This is a descriptive comparison of catalogue configurations, not a clinical performance claim.
Workflow Considerations for Peripheral Nerve Block Needles
Guidance method selection is the point at which pack presentation and component order matter most. Standardising post-procedure audit is often easier than renegotiating the specification later. The source data places peripheral nerve block needles in pain medicine departments as well as in wider distribution channels. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot.
- Workflow steps relevant to regional block services:
- guidance method selection
- needle length and insulation matching
- procedure-specific kit configuration
- post-procedure audit
In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed. Where a service changes post-procedure audit, the pack configuration should be reviewed at the same time. Training is also the right moment to explain why substitutions are not made without approval. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs.
Where regional block services runs several departments, separate stock points should still share one configuration list. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Specialist clinic purchasers should record deviations and handling observations through the department’s usual reporting route. In day-to-day work the sequence runs through post-procedure audit, so the consumable has to fit that step without rework.
What Regional Block Services Should Consider About Peripheral Nerve Block Needles Safety
Safety discussions should stay with design intent and handling, and avoid unsupported performance claims. Single-patient use and aseptic handling are the two safety topics most often written into regional block services specifications. For pain medicine departments, the relevant use case remains peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance rather than a broader therapeutic claim. Supervisors should record which configuration each team was trained on and when.
A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. For regional block services, the practical question is whether the configuration fits the existing routine without extra handling. Standardising post-procedure audit is often easier than renegotiating the specification later.
Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue. The application setting, regional block services, belongs in the specification because it determines pack format and replenishment pattern.
Technical Schedule for Peripheral Nerve Block Needles
Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. In catalogue terms, peripheral nerve block needles sit in the Anesthesia / Spinal Needles line rather than in a separate device family. Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.
| Parameter | Stated specification | Notes / configuration |
|---|---|---|
| 21G | 50 / 80 / 100 / 150 mm | Insulated or non-insulated |
| 22G | 50 / 80 / 100 / 150 mm | Insulated or non-insulated |
Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. The registration file should name the same configuration, 21G / 22G x 50 / 80 / 100 / 150 mm, that appears on the purchase order.
Ordering a single size for a department that works across a size matrix leads to mid-case substitution. Review these points with regional anaesthesia coordinators before the specification is issued, not after quotations arrive. Inventory planning for peripheral nerve block needles normally follows a size matrix, so slow-moving variants should be identified early. The specification 21G / 22G x 50 / 80 / 100 / 150 mm is descriptive, not a performance claim, and should be read that way.
Training Teams on Peripheral Nerve Block Needles
Competency checks should cover aseptic opening, correct identification of 21G / 22G x 50 / 80 / 100 / 150 mm and the disposal route. Supervisors should record which configuration each team was trained on and when. Standardising post-procedure audit is often easier than renegotiating the specification later. Where the source data notes insulation choice follows the guidance method, not the gauge, that statement should be quoted as written rather than expanded.
- Handling topics for a short competency session:
- guidance method selection
- needle length and insulation matching
- procedure-specific kit configuration
- post-procedure audit
- Recognition of the configuration 21G / 22G x 50 / 80 / 100 / 150 mm.
Acceptance criteria should be written before the first delivery so that regional anaesthesia coordinators and the supplier read them the same way. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. Peripheral nerve block needles are intended for peripheral nerve and plexus blockade; beyond that stated use, no additional indication is claimed. Leaving the pack format undefined invites quotations that cannot be compared.
Shelf-life and rotation are managed through lot records; first-expiry-first-out is the usual rule. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Training is also the right moment to explain why substitutions are not made without approval. Requests for samples should use the exact configuration intended for the contract.
Further Considerations for Peripheral Nerve Block Needles in Regional Block Services
For regional block services, the practical question is whether the configuration fits the existing routine without extra handling. Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance. Configuration details such as 21G / 22G x 50 / 80 / 100 / 150 mm belong in the technical schedule, not in a separate email. Distribution is described through Pain clinic supply, which is where regional anaesthesia coordinators usually place volume orders.
At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Reorder points should account for lead time and for any documentation checks on arrival.
Single-patient use and aseptic handling are the two safety topics most often written into regional block services specifications. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. Specialist clinic purchasers usually award on a combination of specification fit, supply continuity and document completeness. Standardising post-procedure audit is often easier than renegotiating the specification later.
Frequently asked questions
Can peripheral nerve block needles be supplied for kit assembly or private label?
In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed. Repeat the same wording, 21G / 22G x 50 / 80 / 100 / 150 mm, across the purchase order, the pack label and the registration file. A short, precise specification is cheaper to administer than a long one full of unverifiable claims.
Why does the registration file need to match 21G / 22G x 50 / 80 / 100 / 150 mm?
Application planning for peripheral nerve block needles starts with the setting: pain medicine departments and similar units. Peripheral nerve block needles reach regional block services through Pain clinic supply, rather than only through direct hospital purchasing. Specialist clinic purchasers usually require that any configuration change be confirmed in writing before the next shipment.
How should regional anaesthesia coordinators handle a proposed configuration change?
Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Specialist clinic purchasers usually award on a combination of specification fit, supply continuity and document completeness. Where the data is silent, the sensible approach is a qualitative requirement plus a document request.
How should a size matrix for peripheral nerve block needles be planned?
Single-patient use and aseptic handling are the two safety topics most often written into regional block services specifications. The stated use, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, has to be achievable inside the existing post-procedure audit routine. Supervisors should record which configuration each team was trained on and when.
Continue reading
- Understanding 27G Microcannulas Costs in Plastic Surgery Hospitals
- Sizing 18G-W Blunt Cannulas for Plastic Surgery Hospitals: A Selection Guide
- How to Choose Peripheral Nerve Block Needles for Pain Clinics
- Customising Nerve Block Kits for Pain Clinics





