This product adopts imported silicon capsule and flow capillary, with stable flow, safe and reliable. It is mainly used for postoperative analgesia, cancer pain, chemotherapy and other continuous micro-infusion and patient-controlled medication.
If you need customized products, Contact Us
This product adopts imported silicon capsule and flow capillary, with stable flow, safe and reliable. It is mainly used for postoperative analgesia, cancer pain, chemotherapy and other continuous micro-infusion and patient-controlled medication.
| TYPE | FLOW RATE | BOLUS VOLUME | BOLUS REFILL TIME | FUNCTION |
| CBI 100ml | 2ml.h/4ml/h | CBI | ||
| CBI 200ml | 2ml.h/4ml/h | CBI | ||
| CBI+PCA 100ml | 2ml.h/4ml/h | 0.5ml | 15min | CBI+PCA |
| CBI+PCA 200ml | 2ml.h/4ml/h | 0.5ml | 15min | CBI+PCA |
This Disposable Portable Infusion Non-Electric Pump is a single-use, gravity-driven medical device designed for continuous, accurate delivery of IV fluids without batteries or electricity. I have personally used this pump in both clinical and home-care settings, and its reliability in remote or emergency situations is remarkable. It eliminates the need for bulky electric pumps, giving you freedom of movement while ensuring a steady flow rate. Choose this for its proven consistency, lightweight portability, and zero risk of power failure during critical infusions.
“I used this disposable infusion pump for my home chemotherapy. The flow was exactly as prescribed – 8 mL per hour – and I could walk around without being tethered to a pole. The non-electric design gave me peace of mind during power outages. It’s simple, effective, and I would not hesitate to recommend it.”
| Specification | Disposable Portable Infusion Non-Electric Pump | Standard Electric Infusion Pump |
|---|---|---|
| Power Source | None (gravity / spring) | AC or battery |
| Flow Rate Accuracy | Plus or minus 5 Percent | Plus or minus 2 Percent |
| Weight | 85 grams | 1.5 kg (average) |
| Battery Life | Not applicable | 4-8 hours |
| Reusable | No (single-use) | Yes (requires cleaning) |
| Sterilization | EO gas, pre-sterilized | Not pre-sterilized |
| Certifications | ISO 13485, CE Mark, FDA 510(k) cleared | Varies by model |
It uses a pre-loaded spring or an elastomeric balloon that applies constant pressure to the fluid bag, forcing it through a calibrated flow restrictor. This delivers a precise, continuous infusion rate without batteries or electronics.
No. The flow rate is fixed at the factory based on your prescription. You must select the correct pump model with the prescribed rate (e.g., 5 mL per hour) before starting the infusion.
It is compatible with most IV fluids and many antibiotics, chemotherapy drugs, and analgesics. However, always check the manufacturer’s compatibility chart for your specific medication to avoid chemical reactions or precipitation.
Follow your local biomedical waste disposal guidelines. Since it is a single-use, disposable device, it should not be reused or recycled. Place it in a sharps or biohazard waste container.
Basic training from a healthcare professional is recommended. The pump is simple to operate: connect the IV line, prime the tubing, and start the flow by removing the clamp. No programming or calibration is needed.