Quick answer: For anaesthesiology departments, Tuohy epidural needles are the consumable line associated with epidural catheter placement. The configuration in the product data is 16G / 18G x 80 / 100 mm; the sections below cover where the item is used, what it is for and how the specification should be written.

Fixing Tuohy Epidural Needles Specification Problems
Failing to align the purchase order with the registration file creates avoidable work at import. Where a service changes post-case disposal and documentation, the pack configuration should be reviewed at the same time. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. Storage conditions should follow the labelled requirements and the supplier’s written handling instructions.
- Practical remedies when supply does not fit the workflow:
- Re-read the configuration 16G / 18G x 80 / 100 mm against the purchase order.
- Review pre-operative case picking with the clinical team.
- Check whether the registration file still matches the supplied item.
- Agree a written corrective action before the next shipment.
The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Introduce Tuohy epidural needles with a short handling session focused on post-case disposal and documentation rather than on catalogue detail. The route to market recorded for this line runs through Hospital analgesia protocols.
Because the stated configuration is 16G / 18G x 80 / 100 mm, a tender that omits it invites inconsistent quotations. Commonly requested documentation includes a quality-system certificate, a declaration of conformity where applicable, and lot records. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Single-patient use and aseptic handling are the two safety topics most often written into anaesthesiology departments specifications.
Acceptance Checks for Tuohy Epidural Needles
A sample retention and lot-traceability routine makes later investigations considerably shorter. Consistent presentation across lots matters as much as the contents of any single pack. Gauge, length and configuration appear in the listing as 16G / 18G x 80 / 100 mm, so substitutions should be flagged explicitly. Importers typically verify that the supplied item matches the product description held in the local registration dossier.
- Goods-in checks for Tuohy epidural needles:
- Label wording matches the purchase order.
- Configuration reads 16G / 18G x 80 / 100 mm.
- Pack integrity is intact and lot identification is legible.
- Documentation set matches the agreed dossier.
- Deviations are quarantined and recorded.
A par level set by anaesthesiology departments reduces the risk of substituting a different gauge mid-case. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Failing to align the purchase order with the registration file creates avoidable work at import. The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern.
The product listing describes design features such as gauge choice follows catheter compatibility, but makes no comparative clinical claim. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Operating room nursing managers usually require that any configuration change be confirmed in writing before the next shipment. Tender documents for Tuohy epidural needles are usually prepared by hospital procurement teams and fulfilled through Hospital analgesia protocols.
Reading the Tuohy Epidural Needles Specification
Because the stated configuration is 16G / 18G x 80 / 100 mm, a tender that omits it invites inconsistent quotations. When hospital procurement teams compare offers, 16G / 18G x 80 / 100 mm is the field that most often gets shortened or lost. Buyers will find Tuohy epidural needles under Anesthesia / Spinal Needles, where the range is described as 16G / 18G x 80 / 100 mm. The stated purpose is epidural catheter placement for labour analgesia and continuous post-operative analgesia, which is the reason the line is included in anaesthesiology departments purchasing.
| Parameter | Stated specification | Notes / configuration |
|---|---|---|
| 16G | 80 / 100 mm | Curved Tuohy bevel |
| 18G | 80 / 100 mm | Curved Tuohy bevel |
Requests for samples should use the exact configuration intended for the contract. Review these points with hospital procurement teams before the specification is issued, not after quotations arrive. A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers.
The most common specification error is quoting the product family without the configuration 16G / 18G x 80 / 100 mm. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. A par level set by anaesthesiology departments reduces the risk of substituting a different gauge mid-case. Gauge, length and configuration appear in the listing as 16G / 18G x 80 / 100 mm, so substitutions should be flagged explicitly.
Managing Tuohy Epidural Needles Size Matrices
Reorder points should account for lead time and for any documentation checks on arrival. Shelf-life and rotation are managed through lot records; first-expiry-first-out is the usual rule. Repeat the same wording, 16G / 18G x 80 / 100 mm, across the purchase order, the pack label and the registration file. A workflow built around post-case disposal and documentation leaves little room for opening multiple separately packed items.
Pack integrity is the first visual check; configuration against the purchase order is the second. The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Introduce Tuohy epidural needles with a short handling session focused on post-case disposal and documentation rather than on catalogue detail.
Where a kit replaces individually picked components, compare the full set-up cost rather than a single item. Review these points with hospital procurement teams before the specification is issued, not after quotations arrive. Storage conditions should follow the labelled requirements and the supplier’s written handling instructions. The route to market recorded for this line runs through Hospital analgesia protocols.
Practical Handling of Tuohy Epidural Needles in Anaesthesiology Departments
In day-to-day work the sequence runs through post-case disposal and documentation, so the consumable has to fit that step without rework. Teams in anaesthesiology departments usually map Tuohy epidural needles against post-case disposal and documentation before fixing a standing order. In anaesthesiology departments, the relevant departments are anaesthesiology departments, and purchasing usually follows their protocol. Acceptance criteria should be written before the first delivery so that hospital procurement teams and the supplier read them the same way.
- Workflow steps relevant to anaesthesiology departments:
- pre-operative case picking
- sterile field set-up
- needle placement and confirmation
- post-case disposal and documentation
The stated purpose is epidural catheter placement for labour analgesia and continuous post-operative analgesia, which is the reason the line is included in anaesthesiology departments purchasing. The stated use, epidural catheter placement for labour analgesia and continuous post-operative analgesia, has to be achievable inside the existing post-case disposal and documentation routine. Supervisors should record which configuration each team was trained on and when. A short, precise specification is cheaper to administer than a long one full of unverifiable claims.
A par level set by anaesthesiology departments reduces the risk of substituting a different gauge mid-case. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue. Where a service changes post-case disposal and documentation, the pack configuration should be reviewed at the same time.
Training Teams on Tuohy Epidural Needles
Staff in anaesthesiology departments benefit from a one-page configuration card kept at the point of use. Training is also the right moment to explain why substitutions are not made without approval. Reviewing post-case disposal and documentation with the clinical team reveals whether the chosen configuration actually fits. Safety discussions should stay with design intent and handling, and avoid unsupported performance claims.
- Handling topics for a short competency session:
- pre-operative case picking
- sterile field set-up
- needle placement and confirmation
- post-case disposal and documentation
- Recognition of the configuration 16G / 18G x 80 / 100 mm.
Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. The same discipline applies across the range, from Tuohy epidural needles to peripheral nerve block needles. Specifying teams should anchor the requirement to the stated purpose, epidural catheter placement for labour analgesia and continuous post-operative analgesia. Approving a substitute by gauge alone misses differences in shaft, tip or matched components.
Storage conditions should follow the labelled requirements and the supplier’s written handling instructions. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict. Evaluation criteria should be visible to all bidders so that equivalent offers can be compared fairly.
How Anaesthesiology Departments Source Tuohy Epidural Needles
Distribution is described through Hospital analgesia protocols, which is where hospital procurement teams usually place volume orders. Operating room nursing managers tend to evaluate Tuohy epidural needles against a fixed configuration before discussing volume. Tuohy epidural needles are listed for use in anaesthesiology departments, which shapes both the specification and the pack configuration. The application setting, anaesthesiology departments, belongs in the specification because it determines pack format and replenishment pattern.
- Channels listed for this line:
- Obstetric anaesthesia procurement
- Hospital analgesia protocols
- Epidural kit OEM
- Import registration and hospital group agreement supply, where applicable.
Component traceability matters more in OEM supply because the finished pack carries another party’s label. Importers typically verify that the supplied item matches the product description held in the local registration dossier. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Version-locked configurations make stock reconciliation simpler because the item identity does not move.
Freight, storage conditions and lot rotation are usually handled as separate lines in anaesthesiology departments budgets. The same discipline applies across the range, from Tuohy epidural needles to peripheral nerve block needles. Tender documents for Tuohy epidural needles are usually prepared by hospital procurement teams and fulfilled through Hospital analgesia protocols. Non-conforming lots should be quarantined and recorded against the same specification used for ordering.
Additional Notes on Tuohy Epidural Needles Specification
Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Specifying teams should anchor the requirement to the stated purpose, epidural catheter placement for labour analgesia and continuous post-operative analgesia. Configuration details such as 16G / 18G x 80 / 100 mm belong in the technical schedule, not in a separate email. Distribution is described through Hospital analgesia protocols, which is where hospital procurement teams usually place volume orders.
At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 16G / 18G x 80 / 100 mm. Keep the discussion anchored to what the specification actually says and to how anaesthesiology departments work. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Reorder points should account for lead time and for any documentation checks on arrival.
Single-patient use and aseptic handling are the two safety topics most often written into anaesthesiology departments specifications. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Operating room nursing managers usually award on a combination of specification fit, supply continuity and document completeness. Standardising post-case disposal and documentation is often easier than renegotiating the specification later.
Frequently asked questions
How should a size matrix for Tuohy epidural needles be planned?
For anaesthesiology departments, the relevant use case remains epidural catheter placement for labour analgesia and continuous post-operative analgesia rather than a broader therapeutic claim. Gauge, length and configuration appear in the listing as 16G / 18G x 80 / 100 mm, so substitutions should be flagged explicitly. Where the data is silent, the sensible approach is a qualitative requirement plus a document request.
What specification should appear on a Tuohy epidural needles purchase order?
The application settings recorded for this line include anaesthesiology departments and comparable services. Distribution is described through Hospital analgesia protocols, which is where hospital procurement teams usually place volume orders. Acceptance criteria should be written before the first delivery so that hospital procurement teams and the supplier read them the same way.
How is sterility and pack integrity checked on delivery?
No certification status should be assumed from a catalogue; ask for the current, valid document instead. Long-term agreements work better when the configuration is version-locked and changes require written confirmation. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes.
What is the stated use of Tuohy epidural needles?
Operating room nursing managers should record deviations and handling observations through the department’s usual reporting route. In day-to-day work the sequence runs through post-case disposal and documentation, so the consumable has to fit that step without rework. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict.
Continue reading
- Common Mistakes When Sourcing Spinal Anaesthesia Kits for Surgical Theatre Procurement
- Epidural Kits Supply Channels for Surgical Theatre Procurement
- Nerve Block Kits Supply Planning for Hospital Operating Rooms
- Customised Procedure Packs Selection Criteria for Anaesthesiology Departments





