Customising Peripheral Nerve Block Needles for Regional Block Services

Quick answer: Peripheral nerve block needles are listed for peripheral nerve and plexus blockade in regional block services. The published configuration is 21G / 22G x 50 / 80 / 100 / 150 mm. For pain service leads, the practical decision is whether that configuration matches the existing specialist pain hospitals routine and the documentation held in the registration file.

Customising Peripheral Nerve Block Needles for Regional Block Services

OEM and Private-Label Peripheral Nerve Block Needles

For kit assembly, the critical inputs are the component specification 21G / 22G x 50 / 80 / 100 / 150 mm and the agreed pack configuration. Any change to a version-locked configuration should require written customer confirmation before implementation. Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations. Non-conforming lots should be quarantined and recorded against the same specification used for ordering.

  • OEM configuration checkpoints:
  • Fix the component specification: 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Agree the pack format and component order.
  • Record any matched-component relationship in writing.
  • Require written confirmation before changing a locked version.

Whether CE marking under MDR, FDA 510(k) clearance or another route applies depends on the destination market and must be confirmed against the supplier’s current file. Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Counting by configuration rather than by carton prevents silent drift in what is actually on the shelf.

Leaving the pack format undefined invites quotations that cannot be compared. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Specialist clinic purchasers commonly ask for a sample build approval step ahead of the first production run. The buyers named in the data include pain service leads, who typically work from a written specification.

Reading the Peripheral Nerve Block Needles Specification

Configuration details such as 21G / 22G x 50 / 80 / 100 / 150 mm belong in the technical schedule, not in a separate email. The specification 21G / 22G x 50 / 80 / 100 / 150 mm is descriptive, not a performance claim, and should be read that way. The GaoGuan Medical listing treats peripheral nerve block needles as a consumable line with a fixed specification of 21G / 22G x 50 / 80 / 100 / 150 mm. In practical terms the primary use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and that purpose drives where the product is deployed.

ParameterStated specificationNotes / configuration
21G50 / 80 / 100 / 150 mmInsulated or non-insulated
22G50 / 80 / 100 / 150 mmInsulated or non-insulated

Evaluation criteria should be visible to all bidders so that equivalent offers can be compared fairly. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs. Pack integrity is the first visual check; configuration against the purchase order is the second. Whether CE marking under MDR, FDA 510(k) clearance or another route applies depends on the destination market and must be confirmed against the supplier’s current file.

Treating peripheral nerve block needles and customised procedure packs as interchangeable ignores the different stated uses recorded in the product data. Where the data is silent, the sensible approach is a qualitative requirement plus a document request. Where regional block services runs several departments, separate stock points should still share one configuration list. Because the stated configuration is 21G / 22G x 50 / 80 / 100 / 150 mm, a tender that omits it invites inconsistent quotations.

The Stated Purpose of Peripheral Nerve Block Needles in Regional Block Services

Because the stated use is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, the configuration is discussed in relation to that procedure. The source listing gives the main use as peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, without extending the claim to other indications. Buyers will find peripheral nerve block needles under Anesthesia / Spinal Needles, where the range is described as 21G / 22G x 50 / 80 / 100 / 150 mm. Teams in specialist pain hospitals usually map peripheral nerve block needles against guidance method selection before fixing a standing order.

  • Stated use: Peripheral nerve and plexus block; insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance.
  • Insulation choice follows the guidance method, not the gauge.
  • Longer lengths serve deep plexus approaches.
  • Ultrasound-led services generally specify non-insulated needles.

Typical deployment is described around regional block services, with specialist pain hospitals named as a target setting. Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Training and correct handling are the practical levers available to specialist pain hospitals when introducing a new consumable.

At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. The same discipline applies across the range, from peripheral nerve block needles to customised procedure packs. Evaluation criteria should be visible to all bidders so that equivalent offers can be compared fairly. The use case recorded in the product data is peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, and specifications are written around it.

The Peripheral Nerve Block Needles Dossier: What Regional Block Services Should Ask for

Where a kit is version-locked, the registration dossier and the packed configuration must stay aligned. Importers typically verify that the supplied item matches the product description held in the local registration dossier. Specialist clinic purchasers usually require that any configuration change be confirmed in writing before the next shipment. Ask bidders to state any deviation from 21G / 22G x 50 / 80 / 100 / 150 mm explicitly rather than burying it in an equivalent-brand clause.

  • Documentation commonly requested in a tender dossier:
  • Current product data sheet naming 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Quality-system certificate valid for the supplied item.
  • Declaration of conformity or market-specific clearance, where applicable.
  • Lot identification and traceability records.
  • Sterilisation and packaging information for the stated presentation.

Peripheral nerve block needles carry the specification 21G / 22G x 50 / 80 / 100 / 150 mm, which is the baseline for acceptance checking. Keep the discussion anchored to what the specification actually says and to how specialist pain hospitals work. The stated use, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance, should be quoted unchanged in any derived specification or pack insert. Storage conditions should follow the labelled requirements and the supplier’s written handling instructions.

Skipping a written confirmation step on configuration changes undermines version control over time. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Commonly requested documentation includes a quality-system certificate, a declaration of conformity where applicable, and lot records. The route to market recorded for this line runs through Pain clinic supply.

Acceptance Checks for Peripheral Nerve Block Needles

At goods receipt, check label wording, lot identification, pack integrity and the stated configuration 21G / 22G x 50 / 80 / 100 / 150 mm. A sample retention and lot-traceability routine makes later investigations considerably shorter. The specification 21G / 22G x 50 / 80 / 100 / 150 mm is descriptive, not a performance claim, and should be read that way. Where a kit is version-locked, the registration dossier and the packed configuration must stay aligned.

  • Goods-in checks for peripheral nerve block needles:
  • Label wording matches the purchase order.
  • Configuration reads 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Pack integrity is intact and lot identification is legible.
  • Documentation set matches the agreed dossier.
  • Deviations are quarantined and recorded.

Inventory planning for peripheral nerve block needles normally follows a size matrix, so slow-moving variants should be identified early. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Treating peripheral nerve block needles and customised procedure packs as interchangeable ignores the different stated uses recorded in the product data. Volume planning should be expressed per department and per month, not as a single annual lump figure.

Training and correct handling are the practical levers available to specialist pain hospitals when introducing a new consumable. Keep the discussion anchored to what the specification actually says and to how specialist pain hospitals work. Pack integrity is the first visual check; configuration against the purchase order is the second. Purchasing responsibility generally sits with pain service leads, supported by Pain clinic supply.

Stock and Rotation for Peripheral Nerve Block Needles in Regional Block Services

Where regional block services runs several departments, separate stock points should still share one configuration list. Version-locked configurations make stock reconciliation simpler because the item identity does not move. When pain service leads compare offers, 21G / 22G x 50 / 80 / 100 / 150 mm is the field that most often gets shortened or lost. In day-to-day work the sequence runs through guidance method selection, so the consumable has to fit that step without rework.

Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. Requests for samples should use the exact configuration intended for the contract. Record decisions in writing so that the next procurement cycle starts from a stable baseline. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict.

Standardising one configuration across departments often reduces administrative cost more than price negotiation does. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Inventory planning for peripheral nerve block needles normally follows a size matrix, so slow-moving variants should be identified early. Distribution is described through Pain clinic supply, which is where pain service leads usually place volume orders.

Distribution Routes for Peripheral Nerve Block Needles

Distribution is described through Pain clinic supply, which is where pain service leads usually place volume orders. Specialist clinic purchasers tend to evaluate peripheral nerve block needles against a fixed configuration before discussing volume. Peripheral nerve block needles are listed for use in specialist pain hospitals, which shapes both the specification and the pack configuration. The application setting, regional block services, belongs in the specification because it determines pack format and replenishment pattern.

  • Channels listed for this line:
  • Regional anaesthesia programmes
  • Pain clinic supply
  • Ultrasound-guided block training
  • Import registration and hospital group agreement supply, where applicable.

Component traceability matters more in OEM supply because the finished pack carries another party’s label. Importers typically verify that the supplied item matches the product description held in the local registration dossier. Keep the discussion anchored to what the specification actually says and to how specialist pain hospitals work. Version-locked configurations make stock reconciliation simpler because the item identity does not move.

Freight, storage conditions and lot rotation are usually handled as separate lines in regional block services budgets. For regional block services, the practical question is whether the configuration fits the existing routine without extra handling. Tender documents for peripheral nerve block needles are usually prepared by pain service leads and fulfilled through Pain clinic supply. Non-conforming lots should be quarantined and recorded against the same specification used for ordering.

Specification Checklist: Peripheral Nerve Block Needles in Regional Block Services

Requests for samples should use the exact configuration intended for the contract. The published specification is 21G / 22G x 50 / 80 / 100 / 150 mm, and any equivalent offer should be compared against it line by line. A sample retention and lot-traceability routine makes later investigations considerably shorter. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers.

  • Pre-order checklist for regional block services:
  • ultrasound versus stimulator guidance
  • deep plexus reach
  • per-procedure accessory sets
  • department-level version control
  • Configuration stated as 21G / 22G x 50 / 80 / 100 / 150 mm.
  • Documentation set and acceptance criteria agreed in writing.

Counting by configuration rather than by carton prevents silent drift in what is actually on the shelf. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. Assuming certification status from a previous tender instead of requesting the current document is a recurring problem. Supervisors should record which configuration each team was trained on and when.

The buyers named in the data include pain service leads, who typically work from a written specification. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. Pack format, documentation work and change-control effort all sit inside the total cost, not just the unit price. Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue.

Frequently asked questions

What is the stated use of peripheral nerve block needles?

Specifying teams should anchor the requirement to the stated purpose, peripheral nerve and plexus block, insulated versions for nerve stimulator guidance, non-insulated for ultrasound guidance. Configuration details such as 21G / 22G x 50 / 80 / 100 / 150 mm belong in the technical schedule, not in a separate email. Record decisions in writing so that the next procurement cycle starts from a stable baseline.

What documentation is normally requested for peripheral nerve block needles?

Typical deployment is described around regional block services, with specialist pain hospitals named as a target setting. The route to market recorded for this line runs through Pain clinic supply. A sample retention and lot-traceability routine makes later investigations considerably shorter.

What belongs in an acceptance check for peripheral nerve block needles?

A change to 21G / 22G x 50 / 80 / 100 / 150 mm or to the pack contents normally triggers a regulatory review on the buyer’s side. Requests for samples should use the exact configuration intended for the contract. Review these points with pain service leads before the specification is issued, not after quotations arrive.

Are peripheral nerve block needles and customised procedure packs interchangeable?

Where the source data notes insulation choice follows the guidance method, not the gauge, that statement should be quoted as written rather than expanded. A workflow built around guidance method selection leaves little room for opening multiple separately packed items. Introduce peripheral nerve block needles with a short handling session focused on guidance method selection rather than on catalogue detail.

Continue reading


Need a specification, pack configuration or documentation list for peripheral nerve block needles in regional block services? Contact the GaoGuan Medical team to request the current product data sheet and a sample configuration.

Share this :

Leave a Reply

Your email address will not be published. Required fields are marked *

Request a Quote
Download technical documentation
Please fill out the form below to receive product brochures, specifications, and technical details.