Réponse rapide : Interventional procedure packs are listed for procedure-configured sterile draping in interventional radiology departments. The published configuration is Configured by procedure (drapes, table covers, accessory combinations). For import registrants, the practical decision is whether that configuration matches the existing third-party imaging centres routine and the documentation held in the registration file.

Safety and Handling Considerations for Interventional Procedure Packs
Any complication-rate discussion belongs in the clinical literature, not in a supplier catalogue. Where the source data notes configuration is customised per procedure and then version-locked, that statement should be quoted as written rather than expanded. Because the stated use is catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, the configuration is discussed in relation to that procedure. Introduce interventional procedure packs with a short handling session focused on drape and accessory configuration rather than on catalogue detail.
Hospital group procedure purchasers usually require that any configuration change be confirmed in writing before the next shipment. A change to Configured by procedure (drapes, table covers, accessory combinations) or to the pack contents normally triggers a regulatory review on the buyer’s side. This is a descriptive comparison of catalogue configurations, not a clinical performance claim. In day-to-day work the sequence runs through drape and accessory configuration, so the consumable has to fit that step without rework.
Leaving the pack format undefined invites quotations that cannot be compared. The same discipline applies across the range, from interventional procedure packs to 27G microcannulas. Les discussions relatives à la sécurité doivent se limiter à la conception et à la manipulation, et éviter toute allégation de performance non étayée. Les accords à long terme sont plus efficaces lorsque la configuration est verrouillée par version et que toute modification nécessite une confirmation écrite.
Defining Interventional Procedure Packs in the GaoGuan Medical Catalogue
Interventional procedure packs are listed in the GaoGuan Medical range under Interventional / Procedure Packs, with a stated specification of Configured by procedure (drapes, table covers, accessory combinations). The specification Configured by procedure (drapes, table covers, accessory combinations) is descriptive, not a performance claim, and should be read that way. The use case recorded in the product data is catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, and specifications are written around it. Interventional procedure packs are listed for use in third-party imaging centres, which shapes both the specification and the pack configuration.
For third-party imaging centres, the relevant use case remains catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure rather than a broader therapeutic claim. Keep the discussion anchored to what the specification actually says and to how third-party imaging centres work. Interventional procedure packs reach interventional radiology departments through déclarant d'importation supply, rather than only through direct hospital purchasing. Hospital group procedure purchasers usually require that any configuration change be confirmed in writing before the next shipment.
Gauge, length and configuration appear in the listing as Configured by procedure (drapes, table covers, accessory combinations), so substitutions should be flagged explicitly. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Where the source data notes configuration is customised per procedure and then version-locked, that statement should be quoted as written rather than expanded. As a catalogue item, Disposable Sterile Interventional Procedure Pack is defined by Configured by procedure (drapes, table covers, accessory combinations) and by its stated use in procedure-configured sterile draping.
Single-Patient Use and Interventional Procedure Packs
Purchasing teams should ask how the chosen configuration supports the department’s existing safety protocol. Non-conforming lots should be quarantined and recorded against the same specification used for ordering. Specifying teams should anchor the requirement to the stated purpose, catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure. Teams in third-party imaging centres usually map interventional procedure packs against drape and accessory configuration before fixing a standing order.
- Single-use and aseptic points for interventional radiology departments:
- Vérifier la présentation jetable indiquée sur l'étiquette.
- Vérifier l'intégrité de l'emballage avant ouverture.
- Consignez le lot conformément à la procédure de documentation du département.
- Éliminer le produit conformément au protocole local de gestion des déchets cliniques.
Commonly requested documentation includes a quality-system certificate, a declaration of conformity where applicable, and lot records. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict. A par level set by third-party imaging centres reduces the risk of substituting a different gauge mid-case.
A workable tender separates the clinical requirement, the configuration Configured by procedure (drapes, table covers, accessory combinations), the pack format and the documentation set. Keep the discussion anchored to what the specification actually says and to how third-party imaging centres work. Training and correct handling are the practical levers available to third-party imaging centres when introducing a new consumable. Application planning for interventional procedure packs starts with the setting: third-party imaging centres and similar units.
Uses That Drive Demand for Interventional Procedure Packs
The use case recorded in the product data is catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, and specifications are written around it. In practical terms the primary use is catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, and that purpose drives where the product is deployed. Interventional procedure packs are a defined line item in the GaoGuan Medical listing, specified as Configured by procedure (drapes, table covers, accessory combinations). A workflow built around drape and accessory configuration leaves little room for opening multiple separately packed items.
- Stated use: Catheter placement, angiography and vascular access procedures; configuration customised and version-locked by procedure.
- Configuration is customised per procedure and then version-locked.
- Drapes, table covers and accessories are the configurable elements.
Interventional procedure packs are listed for use in third-party imaging centres, which shapes both the specification and the pack configuration. Interventional procedure packs are intended for procedure-configured sterile draping; beyond that stated use, no additional indication is claimed. Record decisions in writing so that the next procurement cycle starts from a stable baseline. Hospital group procedure purchasers should record deviations and handling observations through the department’s usual reporting route.
Hospital group procedure purchasers usually require that any configuration change be confirmed in writing before the next shipment. A short, precise specification is cheaper to administer than a long one full of unverifiable claims. Requests for samples should use the exact configuration intended for the contract. Specifying teams should anchor the requirement to the stated purpose, catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure.
Training Teams on Interventional Procedure Packs
When a new gauge or length is added, refresh the training note rather than relying on the old version. A brief refresher after the first month usually surfaces practical issues that a tender cannot predict. The stated use, catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, has to be achievable inside the existing drape and accessory configuration routine. The product listing describes design features such as configuration is customised per procedure and then version-locked, but makes no comparative clinical claim.
- Sujets abordés lors d'une courte session de compétences :
- procedure-list definition
- drape and accessory configuration
- version locking
- case-based replenishment
- Recognition of the configuration Configured by procedure (drapes, table covers, accessory combinations).
A sample retention and lot-traceability routine makes later investigations considerably shorter. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. The use case recorded in the product data is catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure, and specifications are written around it. Failing to align the purchase order with the registration file creates avoidable work at import.
A par level set by third-party imaging centres reduces the risk of substituting a different gauge mid-case. For interventional radiology departments, the practical question is whether the configuration fits the existing routine without extra handling. Handling guidance should be consistent with the labelled instructions and the department’s own protocol. The application setting, interventional radiology departments, belongs in the specification because it determines pack format and replenishment pattern.
Goods-In Inspection of Interventional Procedure Packs
Hospital group procedure purchasers usually require that any configuration change be confirmed in writing before the next shipment. Quality documentation is normally requested as a dossier covering the item, the configuration and the lot. When import registrants compare offers, Configured by procedure (drapes, table covers, accessory combinations) is the field that most often gets shortened or lost. No certification status should be assumed from a catalogue; ask for the current, valid document instead.
- Goods-in checks for interventional procedure packs:
- Le libellé de l'étiquette correspond à celui du bon de commande.
- Configuration reads Configured by procedure (drapes, table covers, accessory combinations).
- L'intégrité de l'emballage est intacte et l'identification du lot est lisible.
- Le dossier documentaire correspond au dossier convenu.
- Les écarts sont mis en quarantaine et consignés.
Version-locked configurations make stock reconciliation simpler because the item identity does not move. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. The most common specification error is quoting the product family without the configuration Configured by procedure (drapes, table covers, accessory combinations). Long-term agreements work better when the configuration is version-locked and changes require written confirmation.
Hospital group procedure purchasers should record deviations and handling observations through the department’s usual reporting route. The wording below follows the source product listing, which records settings, channels and stated uses rather than outcomes. A sample retention and lot-traceability routine makes later investigations considerably shorter. Distribution is described through Import registrant supply, which is where import registrants usually place volume orders.
Compliance Documentation for Interventional Procedure Packs
Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Where a kit is version-locked, the registration dossier and the packed configuration must stay aligned. Pack integrity is the first visual check; configuration against the purchase order is the second. The application setting, interventional radiology departments, belongs in the specification because it determines pack format and replenishment pattern.
- Documents généralement demandés dans un dossier d'appel d'offres :
- Current product data sheet naming Configured by procedure (drapes, table covers, accessory combinations).
- Certificat de système qualité valable pour l'article fourni.
- Déclaration de conformité ou autorisation spécifique au marché, le cas échéant.
- Enregistrements d'identification et de traçabilité des lots.
- Informations relatives à la stérilisation et au conditionnement pour la présentation indiquée.
Gauge, length and configuration appear in the listing as Configured by procedure (drapes, table covers, accessory combinations), so substitutions should be flagged explicitly. Review these points with import registrants before the specification is issued, not after quotations arrive. Any change to a version-locked configuration should require written customer confirmation before implementation. Version-locked configurations make stock reconciliation simpler because the item identity does not move.
Failing to align the purchase order with the registration file creates avoidable work at import. Most disagreements between a buyer and a supplier turn out to be differences in configuration wording. A change to Configured by procedure (drapes, table covers, accessory combinations) or to the pack contents normally triggers a regulatory review on the buyer’s side. For interventional radiology departments, the relevant channel is Import registrant supply, with import registrants drafting the requirement.
Points Often Raised About Interventional Procedure Packs
Keep the discussion anchored to what the specification actually says and to how third-party imaging centres work. Specifying teams should anchor the requirement to the stated purpose, catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure. Configuration details such as Configured by procedure (drapes, table covers, accessory combinations) belong in the technical schedule, not in a separate email. Distribution is described through Import registrant supply, which is where import registrants usually place volume orders.
At goods receipt, check label wording, lot identification, pack integrity and the stated configuration Configured by procedure (drapes, table covers, accessory combinations). This is a descriptive comparison of catalogue configurations, not a clinical performance claim. Standards such as ISO 13485, ISO 11135 for ethylene oxide sterilisation and ISO 10993 for biocompatibility are often referenced in tender dossiers. Reorder points should account for lead time and for any documentation checks on arrival.
Single-patient use and aseptic handling are the two safety topics most often written into interventional radiology departments specifications. Review these points with import registrants before the specification is issued, not after quotations arrive. Hospital group procedure purchasers usually award on a combination of specification fit, supply continuity and document completeness. Standardising drape and accessory configuration is often easier than renegotiating the specification later.
Foire aux questions
What is the stated use of interventional procedure packs?
Specifying teams should anchor the requirement to the stated purpose, catheter placement, angiography and vascular access procedures, configuration customised and version-locked by procedure. Configuration details such as Configured by procedure (drapes, table covers, accessory combinations) belong in the technical schedule, not in a separate email. Review these points with import registrants before the specification is issued, not after quotations arrive.
What documentation is normally requested for interventional procedure packs?
Typical deployment is described around interventional radiology departments, with third-party imaging centres named as a target setting. The route to market recorded for this line runs through Import registrant supply. A sample retention and lot-traceability routine makes later investigations considerably shorter.
What belongs in an acceptance check for interventional procedure packs?
A change to Configured by procedure (drapes, table covers, accessory combinations) or to the pack contents normally triggers a regulatory review on the buyer’s side. Requests for samples should use the exact configuration intended for the contract. A short, precise specification is cheaper to administer than a long one full of unverifiable claims.
Are interventional procedure packs and 27G microcannulas interchangeable?
Where the source data notes configuration is customised per procedure and then version-locked, that statement should be quoted as written rather than expanded. A workflow built around drape and accessory configuration leaves little room for opening multiple separately packed items. Introduce interventional procedure packs with a short handling session focused on drape and accessory configuration rather than on catalogue detail.
Poursuivez votre lecture
- Mid-Face Filler Injection: A Guide to 22G Blunt Cannulas
- 23G Blunt Cannulas Sourcing Errors to Avoid in Filler Injection Programmes
- Le rôle des kits de procédures interventionnelles dans les salles de cathétérisme
- Pitfalls in Interventional Procedure Packs Specification for Catheterisation Labs





